![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644593.webp)
Access Control List Commands
4-215
4
The commands in this section configure ACLs based on hardware addresses,
packet format, and Ethernet type. To configure MAC ACLs, first create an access list
containing the required permit or deny rules, and then bind the access list to one or
more ports.
This command adds a MAC access list and enters MAC ACL configuration mode.
Use the
no
form to remove the specified ACL.
Syntax
[
no
]
access-list mac
acl_name
acl_name
– Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an existing ACL,
use the
permit
or
deny
command to add new rules to the bottom of the list.
To create an ACL, you must add at least one rule to the list.
• To remove a rule, use the
no permit
or
no deny
command followed by the
exact text of a previously configured rule.
• An ACL can contain up to 32 rules.
Example
Related Commands
permit, deny (4-216)
mac access-group (4-218)
show mac access-list (4-217)
Table 4-53 MAC ACL Commands
Command
Function
Mode
Page
access-list mac
Creates a MAC ACL and enters configuration mode
GC
4-215
permit, deny
Filters packets matching a specified source and
destination address, packet format, and Ethernet type
MAC-ACL
4-216
show mac access-list
Displays the rules for configured MAC ACLs
PE
4-217
mac access-group
Adds a port to a MAC ACL
IC
4-218
show mac access-group
Shows port assignments for MAC ACLs
PE
4-218
Console(config)#access-list mac jerry
Console(config-mac-acl)#
Summary of Contents for 6152PL2 FICHE
