![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644588.webp)
Command Line Interface
4-210
4
of a source address and a non-zero flow label. Packets that do not belong to
a flow carry a flow label of zero.
• Optional internet-layer information is encoded in separate headers that may
be placed between the IPv6 header and the upper-layer header in a packet.
There are a small number of such extension headers, each identified by a
distinct Next Header value. IPv6 supports the values defined for the IPv4
Protocol field in RFC 1700, including these commonly used headers:
0 : Hop-by-Hop Options
(RFC 2460)
6 : TCP Upper-layer Header
(RFC 1700)
17 : UDP Upper-layer Header
(RFC 1700)
43 : Routing
(RFC
2460)
44 : Fragment
(RFC
2460)
51 : Authentication
(RFC
2402)
50 : Encapsulating Security Payload
(RFC 2406)
60 : Destination Options
(RFC 2460)
Example
This example accepts any incoming packets if the destination address is
2009:DB9:2229::79/48.
This allows packets to any destination address when the DSCP value is 5.
This allows any packets sent to the destination 2009:DB9:2229::79/48 when the flow
label is 43.”
Related Commands
access-list ipv6 (4-207)
This command displays the rules for configured IPv6 ACLs.
Syntax
show ip access-list
{
standard
|
extended
} [
acl_name
]
•
standard
– Specifies a standard IPv6 ACL.
•
extended
– Specifies an extended IPv6 ACL.
•
acl_name
– Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Summary of Contents for 6152PL2 FICHE
