Command Line Interface
4-172
4
Example
Use this command to display secure MAC address table entries.
Syntax
show network-access mac-address-table
[
static
|
dynamic
]
[
address
mac-address
[
mask
]] [
interface
interface
]
[
sort
{
address
|
interface
}]
•
static
- Specifies static address entries.
•
dynamic
- Specifies dynamic address entries.
•
mac-address
- Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
•
mask
- Specifies a MAC address bit mask for filtering displayed addresses.
•
interface
- Specifies a port interface.
ethernet
unit
/
port
-
unit
- This is unit 1.
-
port
- Port number. (Range: 1-28/52)
•
sort
- Sorts displayed entries by either MAC address or interface.
Default Setting
Displays all entries.
Command Mode
Privileged Exec
Command Usage
When using a bit mask to filter displayed MAC addresses, a 1 means “care”
and a 0 means “don't care”. For example, a MAC of 00-00-01-02-03-04 and
mask FF-FF-FF-00-00-00 would result in all MACs in the range
00-00-01-00-00-00 to 00-00-01-FF-FF-FF to be displayed. All other MACs
would be filtered out.
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time : 1800
--------------------------------------------------
--------------------------------------------------
Port : 1/1
MAC Authentication : Disabled
MAC Authentication Intrusion action : Block traffic
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts : 2048
Dynamic VLAN Assignment : Enabled
Guest VLAN : Disabled
Console#
Summary of Contents for 6152PL2 FICHE
