![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644191.webp)
General Security Measures
3-135
3
After configuring the Access Control Lists (ACL), you can bind the ports that need to
filter traffic to the appropriate ACLs. You can assign one IP access list to any port.
Command Usage
• Each ACL can have up to 32 rules.
• This switch supports ACLs for ingress filtering only.
• You only bind one ACL to any port for ingress filtering.
Command Attributes
•
Port
– Fixed port or SFP module. (Range: 1-28/52)
•
IP
– Specifies the IP ACL to bind to a port.
•
MAC
– Specifies the MAC ACL to bind to a port.
• IPv6
– Specifies the IPv6 ACL to bind to a port.
•
IN
– ACL for ingress packets.
• Trunk
– Indicates if a port is a member of a trunk. To create trunks and select port
members, see Creating Trunk Groups on page 3-160.
Web
– Click Security, ACL, Port Binding. Mark the Enabled check box for the port
you want to bind to an ACL for ingress traffic, select the required ACL from the
drop-down list, then click Apply.
Figure 3-81 Configuring ACL Port Binding
Summary of Contents for 6152PL2 FICHE
