![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644103.webp)
Basic Configuration
3-47
3
Web
–
Select SNTP, Clock Time Zone. Set the offset for your time zone relative to
the UTC using either a predefined or custom definition, and click Apply.
Figure 3-27 Setting the System Clock
CLI -
This example shows how to set the time zone for the system clock using one of
the predefined time zone configurations.
Use the Summer Time page to set the system clock forward during the summer
months (also known as daylight savings time).
Command Usage
In some countries or regions, clocks are adjusted through the summer months so
that afternoons have more daylight and mornings have less. This is known as
Summer Time, or Daylight Savings Time (DST). Typically, clocks are adjusted
forward one hour at the start of spring and then adjusted backward in autumn.
Command Attributes
General Configuration
•
Summer Time in Effect
– Shows if the system time has been adjusted.
•
Status
– Shows if summer time is set to take effect during the specified period.
•
Name
– Name of the time zone while summer time is in effect, usually an acronym.
(Range: 1-30 characters)
•
Mode
– Selects one of the following configuration modes. (The Mode option can
only be managed when the Summer Time Status option has been set to enabled
for the switch.)
Predefined Mode
– Configures the summer time status and settings for the switch
using predefined configurations for several major regions of the world. To specify
the time corresponding to your local time when summer time is in effect, select the
predefined summer-time zone appropriate for your location.
Console(config)#clock timezone-predefined GMT-0930-Taiohae
4-75
Console(config)#
Summary of Contents for 6152PL2 FICHE
