![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644491.webp)
Authentication Commands
4-113
4
This command updates all privilege commands entered during the current session
to the running configuration.
Command Mode
Privileged Exec
Command Usage
Due to system limitations in the current software,
privilege
commands
(page 4-112) entered during the current switch session will not be stored
properly in the running-config file (see
show running-config
on page 4-30).
The
privilege rerun
command must therefore be used to correctly update
these commands to the running-config file.
Example
This command shows the privilege level for the current user, or the privilege level for
commands modified by the
privilege
command (see page 4-112).
Syntax
show privilege
[
command
]
command
- Displays the privilege level for all commands modified by the
privilege
command.
Command Mode
Privileged Exec
Example
This example shows the privilege level for any command modified by the
privilege
command.
Console#privilege rerun
Console#
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#
Summary of Contents for 6152PL2 FICHE
