![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644447.webp)
System Management Commands
4-69
4
This command sets the IP address of the servers to which SNTP time requests are
issued. Use the this command with no arguments to clear all time servers from the
current list.
Syntax
sntp server
[
ip1
[
ip2
[
ip3
]]]
ip
- IP address of a time server (NTP or SNTP).
(Range: 1-3 addresses)
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command specifies time servers from which the switch will poll for time
updates when set to SNTP client mode. The client will poll the time servers in
the order specified until a response is received. It issues time synchronization
requests based on the interval set via the
sntp poll
command.
Example
Related Commands
sntp client (4-68)
sntp poll (4-69)
show sntp (4-70)
This command sets the interval between sending time requests when the switch is
set to SNTP client mode. Use the
no
form to restore to the default.
Syntax
sntp poll
seconds
no sntp poll
seconds
- Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Console(config)#sntp server 10.1.0.19
Console(config)#
Summary of Contents for 6152PL2 FICHE
