SMC Networks 6152PL2 FICHE, Management Manual

Page: 455 / 818

System Management Commands
4-77
4
• e-minute - The minute summer time will end. (Range: 0-59 minutes)
• offset - Summer time offset from the regular time zone, in minutes.
(Range: 0-99 minutes)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• In some countries or regions, clocks are adjusted through the summer months
so that afternoons have more daylight and mornings have less. This is known
as Summer Time, or Daylight Savings Time (DST). Typically, clocks are
adjusted forward one hour at the start of spring and then adjusted backward
in autumn.
• This command sets the summer-time time zone relative to the currently
configured time zone. To specify a time corresponding to your local time when
summer time is in effect, you must indicate the number of minutes your
summer-time time zone deviates from your regular time zone.
Example
Related Commands
show sntp (4-70)
clock summer-time (predefined)
This command configures the summer time (daylight savings time) status and
settings for the switch using predefined configurations for several major regions of
the world. Use the
no form to disable summer time.
Syntax
clock summer-time name predefined [ australia | europe | new-zealand |
usa ]
no clock summer-time
name - Name of the timezone while summer time is in effect, usually an
acronym. (Range: 1-30 characters)
Default Setting
Disabled
Command Mode
Global Configuration
Console(config)#clock summer-time DEST date april 1 2007 23 23 april 23
2007 23 23 60
Console(config)#