![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644794.webp)
Command Line Interface
4-416
4
•
count
- Number of packets to send. (Range: 1-16)
•
size
- Number of bytes in a packet. (Range: 32-512)
The actual packet size will be eight bytes larger than the size specified
because the router adds header information.
Default Setting
count: 5
size: 32
Command Mode
Normal Exec, Privileged Exec
Command Usage
• Use the ping command to see if another site on the network can be reached.
• Following are some results of the
ping
command:
-
Normal response
- The normal response occurs in one to ten seconds,
depending on network traffic.
-
Destination does not respond
- If the host does not respond, a “timeout”
appears in ten seconds.
-
Destination unreachable
- The gateway for this destination indicates that
the destination is unreachable.
-
Network or host unreachable
- The gateway found no corresponding entry
in the route table.
• Press <Esc> to stop pinging.
Example
Related Commands
interface (4-221)
Console#ping 10.1.0.9
Type ESC to abort.
PING to 10.1.0.9, by 5 32-byte payload ICMP packets, timeout is 5 seconds
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 10 ms
Ping statistics for 10.1.0.9:
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
Approximate round trip times:
Minimum = 10 ms, Maximum = 20 ms, Average = 10 ms
Console#
Summary of Contents for 6152PL2 FICHE
