![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644607.webp)
Interface Commands
4-229
4
• The rate limits set by this command are also used by automatic storm control
when the control response is set to rate limiting by the
auto-traffic-control
action
command (page 4-241).
Example
The following shows how to configure broadcast storm control at 500 kilobits per
second:
clear counters
This command clears statistics on an interface.
Syntax
clear counters
interface
interface
•
ethernet
unit
/
port
-
unit
- Stack unit. (Range: 1)
-
port
- Port number. (Range: 1-28/52)
•
port-channel
channel-id
(Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the base
value for displayed statistics to zero for the current management session.
However, if you log out and back into the management interface, the statistics
displayed will show the absolute value accumulated since the last power reset.
Example
The following example clears statistics on port 5.
show interfaces brief
This command displays a summary of key information, including operational status,
native VLAN ID, default priority, speed/duplex mode, and port type for all ports.
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/5
Console(config-if)#switchport broadcast packet-rate 500
Console(config-if)#
Console#clear counters ethernet 1/5
Console#
Summary of Contents for 6152PL2 FICHE
