![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644372.webp)
Configuring the Switch
3-316
3
•
Cluster IP Pool
– An “internal” IP address pool that is used to assign IP addresses
to Member switches in the cluster. Internal cluster IP addresses are in the form
10.
x.x.member-ID
. Only the base IP address of the pool needs to be set since
Member IDs can only be between 1 and 36. Note that y
ou cannot change the cluster
IP pool when the switch is currently in Commander mode. Commander mode must first
be disabled. (Default: 10.254.254.1)
•
Number of Members
– The current number of Member switches in the cluster.
•
Number of Candidates
– The current number of Candidate switches discovered
in the network that are available to become Members.
Web
– Click Cluster, Configuration.
Figure 3-185 Cluster Configuration
CLI
– This example first enables clustering on the switch, sets the switch as the
cluster Commander, and then configures the cluster IP pool.
Console(config)#cluster
4-81
Console(config)#cluster commander
4-82
Console(config)#
4-83
Console(config)#exit
Console#show cluster
4-84
Role: commander
Interval heartbeat: 30
Heartbeat loss count: 3
Number of Members: 0
Number of Candidates: 0
Console#
Summary of Contents for 6152PL2 FICHE
