![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644613.webp)
Automatic Traffic Control Commands
4-235
4
SNMP Trap Commands
snmp-server
enable port-traps atc
broadcast-alarm-fire
Sends a trap when broadcast traffic exceeds the upper
threshold for automatic storm control
IC (Port)
4-242
snmp-server
enable port-traps atc
multicast-alarm-fire
Sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control
IC (Port)
4-243
snmp-server
enable port-traps atc
broadcast-alarm-clear
Sends a trap when broadcast traffic falls beneath the
lower threshold after a storm control response has been
triggered
IC (Port)
4-243
snmp-server
enable port-traps atc
multicast-alarm-clear
Sends a trap when multicast traffic falls beneath the lower
threshold after a storm control response has been
triggered
IC (Port)
4-244
snmp-server
enable port-traps atc
broadcast-control-apply
Sends a trap when broadcast traffic exceeds the upper
threshold for automatic storm control and the apply timer
expires
IC (Port)
4-244
snmp-server
enable port-traps atc
multicast-control-apply
Sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control and the apply timer
expires
IC (Port)
4-245
snmp-server
enable port-traps atc
broadcast-control-release
Sends a trap when broadcast traffic falls beneath the
lower threshold after a storm control response has been
triggered and the release timer expires
IC (Port)
4-245
snmp-server
enable port-traps atc
multicast-control-release
Sends a trap when multicast traffic falls beneath the lower
threshold after a storm control response has been
triggered and the release timer expires
IC (Port)
4-246
ATC Display Commands
show auto-traffic-control
Shows global configuration settings for automatic storm
control
PE
4-246
show auto-traffic-control
interface
Shows interface configuration settings and storm control
status for the specified port
PE
4-247
* Enabling automatic storm control on a port will disable hardware-level storm control on the same port if configured
by the
switchport packet-rate
command (page 4-228).
Table 4-57 ATC Commands
(Continued)
Command
Function
Mode
Page
Summary of Contents for 6152PL2 FICHE
