SMC Networks 6152PL2 FICHE, Management Manual

Page: 756 / 818

Command Line Interface
4-378
4
service-policy
This command applies a policy map defined by the policy-map command to the
ingress queue of a particular interface. Use the no form to remove the policy map
from this interface.
Syntax
[ no ] service-policy input policy-map-name
• input - Apply to the input traffic.
• policy-map-name - Name of the policy map for this interface.
(Range: 1-16 characters)
Default Setting
No policy map is attached to an interface.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• Only one policy map can be assigned to an interface.
• First define a class map, then define a policy map, and finally use the
service-policy command to bind the policy map to the required interface.
• The switch does not allow a policy map to be bound to an interface for egress
traffic.
Example
This example applies a service policy to an ingress interface.
show class-map
This command displays the QoS class maps which define matching criteria used for
classifying traffic.
Syntax
show class-map [ class-map-name ]
class-map-name - Name of the class map. (Range: 1-16 characters)
Default Setting
Displays all class maps.
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#service-policy input rd_policy
Console(config-if)#