![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644076.webp)
Configuring the Switch
3-20
3
Using DHCP/BOOTP
If your network provides DHCP/BOOTP services, you can configure the switch to be
dynamically configured by these services.
Web
– Click System, IP Configuration. Specify the VLAN to which the management
station is attached, set the IP Address Mode to DHCP or BOOTP. Click Apply to
save your changes.
Figure 3-7 DHCP IP Configuration
Note:
If you lose your management connection, use a console connection and enter
“show ip interface” to determine the new switch address.
CLI
– Specify the management interface, and set the IP address mode to DHCP or
BOOTP, and then enter the “ip dhcp restart” command.
Console#config
Console(config)#interface vlan 1
4-221
Console(config-if)#ip address dhcp
4-412
Console(config-if)#end
Console#ip dhcp restart
4-414
Console#show ip interface
4-414
IP Address and Netmask: 192.168.1.1 255.255.255.0 on VLAN 1,
Address Mode: User specified
Console#
Summary of Contents for 6152PL2 FICHE
