Authentication Commands
4-131
4
Command Mode
Line Configuration
Example
aaa authorization exec
This command enables the authorization for Exec access. Use the
no
form to
disable the authorization service.
Syntax
aaa authorization
exec
{
default
|
method-name
}
group
{
|
server-group
}
no aaa authorization
exec
{
default
|
method-name
}
•
default
- Specifies the default authorization method for Exec access.
•
method-name -
Specifies an authorization method for Exec access.
(Range: 1-255 characters)
•
group
- Specifies the server group to use.
-
- Specifies all hosts configured with the
tacacs-server host
command described on page 4-121.
-
server-group -
Specifies the name of a server group configured with the
aaa group server
command described on 4-124.
(Range: 1-255 characters)
Default Setting
Authorization is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
• This command performs authorization to determine if a user is allowed to run
an Exec shell.
• AAA authentication must be enabled before authorization is enabled.
• If this command is issued without a specified named method, the default
method list is applied to all interfaces or lines (where this authorization type
applies), except those that have a named method explicitly defined.
Example
Console(config)#line console
Console(config-line)#accounting commands 15 default
Console(config-line)#
Console(config)#aaa authorization exec default group
Console(config)#
Summary of Contents for 6152PL2 FICHE
