![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644620.webp)
Command Line Interface
4-242
4
auto-traffic-control control-release
This command manually releases a control response.
Syntax
auto-traffic-control
{
broadcast
|
multicast
}
control-release
•
broadcast
- Specifies automatic storm control for broadcast traffic.
•
multicast
- Specifies automatic storm control for multicast traffic.
Command Mode
Interface Configuration (Ethernet)
Command Usage
• This command can be used to manually stop a control response any time after
the specified action has been triggered.
• If a port has been shut down by a control response it can re-enabled using this
command or using the
no shutdown
command (page 4-227).
Example
snmp-server enable port-traps atc broadcast-alarm-fire
This command sends a trap when broadcast traffic exceeds the upper threshold for
automatic storm control. Use the
no
form to disable this trap.
Syntax
[
no
]
snmp-server enable port-traps atc broadcast-alarm-fire
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Example
Related Commands
auto-traffic-control alarm-fire-threshold (4-239)
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast control-release
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-alarm-fire
Console(config-if)#
Summary of Contents for 6152PL2 FICHE
