![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644293.webp)
VLAN Configuration
3-237
3
Use the Traffic Segmentation Session Configuration page to create a client session,
and assign the downlink and uplink ports to service the traffic associated with each
session.
Command Attributes
•
Session ID
– Traffic segmentation session. (Range: 1-15)
•
Direction
– Uplink or downlink interface.
•
Interface
– Port or trunk used for assigned traffic segmentation session.
Due to switch ASIC limitations, ports 1-8, 9-16, 17-24 are grouped together when
any of the group members are configured as an uplink or downlink interface.
Web
– Click VLAN, Traffic Segmentation, Session Configuration. Set the session
number, specify whether an uplink or downlink is to be used, select the interface,
and click Apply.
Figure 3-134 Traffic Segmentation Session Configuration
CLI
– This example enables traffic segmentation and allows traffic to be forwarded
across the uplink ports assigned to different client sessions.
Console(config)#pvlan session 1 uplink ethernet 1/24 downlink ethernet 1/1
4-320
Console(config)#exit
Console#show pvlan
4-321
Private VLAN Status : Enabled
Uplink-to-Uplink Mode : Forwarding
Session Uplink Ports Downlink Ports
--------- ------------------------------ -----------------------------
1 Ethernet 1/24 Ethernet 1/1
Ethernet 1/2
Ethernet 1/3
Ethernet 1/4
Ethernet 1/5
Ethernet 1/6
Ethernet 1/7
Ethernet 1/8
Console#
Summary of Contents for 6152PL2 FICHE
