![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644215.webp)
Port Configuration
3-159
3
Avoid using flow control on a port connected to a hub unless it is actually
required to solve a problem. Otherwise back pressure jamming signals may
degrade overall performance for the segment attached to the hub.
(Default: Autonegotiation enabled; Advertised capabilities for 100BASE-TX –
10half, 10full, 100half, 100full; 1000BASE-T – 10half, 10full, 100half, 100full,
1000full; 1000BASE-SX/LX/LH – 1000full)
•
Media Type
– Configures the forced/preferred port type to use for the combination
ports (Ports 25-26/49-52).
-
Copper-Forced
- Always uses the built-in RJ-45 port.
-
SFP-Forced
- Always uses the SFP port (even if a module is not installed).
-
SFP-Preferred-Auto
- Uses SFP port if both combination types are functioning
and the SFP port has a valid link. (This is the default.)
•
Trunk
– Indicates if a port is a member of a trunk. To create trunks and select port
members, see Creating Trunk Groups on page 3-160.
Web
– Click Port, Port Configuration or Trunk Configuration. Modify the required
interface settings, and click Apply.
Figure 3-93 Port/Trunk Configuration
CLI
– Select the interface, and then enter the required settings.
Console(config)#interface ethernet 1/13
4-221
Console(config-if)#description RD SW#13
4-221
Console(config-if)#shutdown
4-227
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
4-223
Console(config-if)#speed-duplex 100half
4-222
Console(config-if)#flowcontrol
4-225
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
4-224
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Summary of Contents for 6152PL2 FICHE
