Siemens HydroRanger 200 HMI, Operating Instructions Manual

Page: 199 / 404

Parameter reference
8.6 Setup (2.)
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
197
ON setpoint (2.8.1.5.)
Sets the process point at which the relay changes from its Normal state.
Index Relay
Values Range: -999 ... 9999
Preset: ----
Altered by Span (2.2.2.) (Page 169)
Related
•
Relay function (2.8.1.4.) (Page 195)
• OFF setpoint (2.8.1.6.) (Page 197)
•
Preset applications (2.8.1.3.) (Page 194)
For most applications, the relay is tripped at this point. For In-bounds and Out-of-bounds
alarms, it is the high point in the specified range. This parameter is set according to Span
(2.2.2.) (Page 169) even when another reading, such as volume, is shown on the local
display.
OFF setpoint (2.8.1.6.)
Sets the process point at which the relay returns to its Normal state.
Index Relay
Values Range: -999 ... 9999
Preset: ----
Altered by Span (2.2.2.) (Page 169)
Related
• Relay function (2.8.1.4.) (Page 195)
•
ON setpoint (2.8.1.5.) (Page 197)
• Preset applications (2.8.1.3.) (Page 194)
For most applications, the relay is tripped at this point. For In-bounds and Out-of-bounds
alarms, it is the high point in the specified range. This parameter is set according to Span
(2.2.2.) (Page 169) even when another reading, such as volume, is shown on the local
display.
Level selector (2.8.1.7.)
Sets the Level Point index for all parameters applicable to this sub-menu.