Siemens 6EP4131-0GB00-0AY0 Equipment Manual Download Page 63

Page: 63 / 264

Engineering and remote access

3.4 SIMATIC STEP 7 in the TIA Portal

SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76

3.4

SIMATIC STEP 7 in the TIA Portal

3.4.1

Introduction

In SIMATIC STEP 7 in the TIA Portal, the basic unit SITOP UPS1600 and its battery modules

SITOP BAT1600 or SITOP UPS1100 can be integrated in projects, parameterized and

diagnosed.

Note

If you use SIMATIC STEP 7 in the TIA Portal, and the SITOP UPS1600 version to be configured

is not supported, then you must install the appropriate Hardware Support Package (HSP) or

the appropriate generic station description file (GSD) in order to be able to use the SITOP

UPS1600 and the supplementary modules.
You can find more information at Installing the Hardware Support Package (HSP) (Page 63) or

Installing the generic station description file (GSD) (Page 64).

3.4.2

Installing the Hardware Support Package (HSP)

Note

The HSP is available at our SITOP-homepage (

http://www.siemens.com/sitop-ups1600

) or

directly at (

https://support.industry.siemens.com/cs/ww/de/view/72341852/en?dl=en

Procedure

To install the Hardware Support Package, proceed as follows:
1.

Start STEP 7 in the TIA Portal.

In the "Options" menu, click on "Support Packages".

Dialog "Detailed information" opens.
All Support Packages from the directory that you specified as storage location for Support

Packages in the settings are listed in a table.

Summary of Contents for 6EP4131-0GB00-0AY0









































































































































































































































































Search results

Summary of Contents for 6EP4131-0GB00-0AY0

Reviews:

Related manuals for 6EP4131-0GB00-0AY0

Brands by name

Popular brands

Siemens 6EP4131-0GB00-0AY0, Equipment Manual

Search results

Summary of Contents for 6EP4131-0GB00-0AY0

Reviews:

Related manuals for 6EP4131-0GB00-0AY0

Brands by name

Popular brands