Siemens 6EP4131-0GB00-0AY0 Equipment Manual Download Page 187

Page: 187 / 264

SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76

187

Mounting/removing

5.1

SITOP UPS1600

WARNING

Installing the device in a housing or a control cabinet

The SITOP UPS1600s are built-in units. They must be installed in a housing or control

cabinet where only qualified personnel have access.

The device can be mounted in a control cabinet on DIN rails (see Chapter Mechanical system

(Page 246))

WARNING

Use in hazardous zones

If the device is to be used in a hazardous zone (II 3G Ex nA nC IIC T4 Gc) it must be installed

in a distribution box with degree of protection IP54 or higher. This distribution box must

comply with the requirements of EN 60079-15.

Mounting

To mount the device, position it with the DIN rail guide at the upper edge of the standard

mounting rail and press down to lock it into place. If this is too difficult, press slider

⑩

at the

same time, as described under "Removal".

Summary of Contents for 6EP4131-0GB00-0AY0









































































































































































































































































Search results

Summary of Contents for 6EP4131-0GB00-0AY0

Reviews:

Related manuals for 6EP4131-0GB00-0AY0

Brands by name

Popular brands

Siemens 6EP4131-0GB00-0AY0, Equipment Manual

Search results

Summary of Contents for 6EP4131-0GB00-0AY0

Reviews:

Related manuals for 6EP4131-0GB00-0AY0

Brands by name

Popular brands