Siemens 6EP4131-0GB00-0AY0 Equipment Manual Download Page 102

Page: 102 / 264

Engineering and remote access

3.5 SIMATIC STEP 7

SITOP UPS1600 / BAT1600 / UPS1100

102

Equipment Manual, 07.2021, A5E37775406-11-76

WARNING

Firmware update to V2.3.0 with UPS Manager

If the UPS Manager was used to update the firmware to V2.3.0 for devices with PROFINET

interface, then the update cannot be successfully completed. In a case such as this, the

device signals a software error using LED 1 (O.K./BAT.). Such a device can be made

operational again by performing an update using the web server, see Firmware update with

web server (Page 135).

Note

Install the current version of the SITOP Managers, before you start the firmware update. The

installation file for the SITOP Manager is available at no charge on the SITOP home page

(

http://www.siemens.com/sitop

) or directly

(

https://support.industry.siemens.com/cs/ww/en/view/109760607

Note

Do not switch-off the devices during the firmware update.

The files for updating the firmware (firmware updates) are available online under

(

http://support.automation.siemens.com/WW/view/en/79207181

). Different firmware

updates are offered depending on the amp rating of the SITOP UPS1600.

Note
Observe the compatibility of the firmware!

Other firmware updates are not compatible.
Determine the amp rating of your SITOP UPS1600 and download the appropriate firmware

update.

Note

From device firmware 2.3, a downgrade can be made to version 2.2.3. A downgrade is not

supported for older versions. Information on how to read out the firmware release from the

device is provided in Section Determining the firmware version (Page 135).

Note
"Reset to Factory" function:

All configuration parameters are reset to the default setting; 0.0.0.0 is used for the IP

address. A new IP address must then be assigned, as otherwise a connection will not be able

to be established to the SITOP Manager or the TIA Portal.

Preconditions

•

The SITOP UPS1600 has been correctly connected and linked with the PROFINET IO

system.

•

PG/PC with STEP 7 is connected with the network.

Summary of Contents for 6EP4131-0GB00-0AY0









































































































































































































































































Search results

Summary of Contents for 6EP4131-0GB00-0AY0

Reviews:

Related manuals for 6EP4131-0GB00-0AY0

Brands by name

Popular brands

Siemens 6EP4131-0GB00-0AY0, Equipment Manual

Search results

Summary of Contents for 6EP4131-0GB00-0AY0

Reviews:

Related manuals for 6EP4131-0GB00-0AY0

Brands by name

Popular brands