![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203056.webp)
56
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
Fig. 67: CAN node
3
Disconnect the power supply:
1
Press with a screwdriver into the opening next to it.
2
Disconnect the cable.
4
Disconnect the leads.
5
Pull the orange lever to pull out the CAN bus.
Fig. 68: CAN node, detail
6
Check the switch on the new CAN node. Use the settings of the old CAN node.
1
Bus cable
2
Openings
3
Power supply
Document the assignment of the leads at the CAN node before disconnecting, e.g. with
a photo.
1
Leads
2
Orange lever
3
Switch