![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203068.webp)
68
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
13
Loosen the bracket plate fastening screws with a Phillips screwdriver (1 piece).
Fig. 88: Bracket plate
14
Remove the bracket plate.
15
Remove the lower cover plate and left cover.
>>> The side with recess for the cable of the heating spiral on the rear side is open.
>>> Upper cover plate and right cover remain together.
16
Lift out the inner part of the cell.
5.2.2
Fitting the complete cell
1
Replace the inner part of the cell in the upper cover plate and the right cover.
Fig. 89: Inserting the cell
2
Screw the right and left covers tight.
3
Insert the cable conduit into the recess. Observe the position of the sealing ring.
Fig. 90: Cell, left cover
1
Fastening screw
Tools required
Phillips screwdriver
5 mm Allen key
Jaw wrench