![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203044.webp)
44
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
3
MAINTENANCE
3.5.2
Opening the sender/receiver unit
1
Loosen the fastening screws of the cover with an Allen key (4 pieces).
Fig. 57:
S
ender/receiver unit cover
2
Remove the sender/receiver unit cover.
3.5.3
Replacing the drying agent
1
Open the sender/receiver unit (
see Chapter “Opening the sender/receiver unit”,
2
Loosen the fastening screws of the drying agent container on the inside of the lid with a
Phillips screwdriver (2 pieces).
Fig. 58: Drying agent container
Do not remove the screws, only loosen them.
1 Fastening screws
The drying agent must be replaced each time the sender/receiver unit is opened.
Pay attention to dust protection: Refit the sender/receiver unit cover during work on the
unit.
The drying agent must be replaced each time the sender/receiver unit is opened.
Tools required
Phillips screwdriver
Spare parts set No.
Contents
5310504
Drying agent sachets 2 TME
1 Screws
2 Drying agent container