![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203013.webp)
13
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
MAINTENANCE
3
3
Fit new filter pad.
The labeled side must point towards the fan.
3.3.1.2
Roof ventilator
Filter mats on the device cabinet can be replaced when the equipment is switched on.
1
Open the bayonet locks on the top of the roof ventilator with Torx TX20 (4 pieces).
2
Remove the roof ventilator cover.
3
Remove old filter mats (4 pieces).
4
Insert new filter mats at the edges (4 pieces).
Labeled sides must point to the fan.
5
Replace the cover.
6
Close the locks.
Observe the flow direction when inserting the filter mat: The firm/labeled side points to
the clean air side, the open/soft side to the dust air side.
Tools required
Torx screwdriver TX20
Observe the flow direction when inserting the filter mat: The firm/labeled side faces the
inside of the cabinet.