![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203048.webp)
48
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
4
FUNCTIONAL TEST
1
Select
Parameterization
->
Measuring components
->
Definition measuring
components
.
2
Compare individual warning thresholds of the individual components against control
values of the reference energy. The reference energy of the respective component
must be at least 5 percentage points above the individual warning threshold.
3
Proceed as follows when the reference energy is lower or a maintenance request is
pending:
1
Check the beamer current (
see Chapter “Beamer current check”, page 47
).
2
When the beamer current is OK, check optical components:
– Window soiling
– Soiling of the gold layer of the mirror plates
– Cloudiness of the lens
4.5
Test signal transmission
4.5.1
Setting the IP address
See SOPAS ET Manual.