99
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
REPAIRS
5
Fig. 145: Fan, power supply
4
Loosen the fan fastening screws with a Phillips screwdriver (4 pieces).
5
Remove the inner fan cover and fan.
6
Fasten the new fan:
1
Insert the new fan together with the new fan cover.
2
Tighten the fastening screws.
7
Replace the electronics housing cover and screw tight.
8
Fit a new filter mat on the outside.
9
Close the outside ventilator cover.
10
Connect the MCS200HW power supply.
5.3.6
Replacing the pressure control module
Fig. 146: Pressure control module
1
Disconnect the MCS200HW power supply.
2
Close off 4 bar instrument air.
1 Fan
2 Power supply
Tools required
Phillips screwdriver
5 mm Allen key
Spare parts set No.
Contents
2081835
Pressure control module