![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203080.webp)
80
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
Fig. 112: Cell, rear side with heating cartridges
4
Remove heating cartridges (4 pieces).
5
Remove the heating cartridge cable from the cable conduit.
1
Open the contact plug:
▸
Carefully lever open the clamps of the contact plug with a slotted screwdriver
(3 pieces).
Fig. 113: Opening the contact plug
1
Heating cartridge
2
Fastening clip
If a heating cartridge is stuck, it can be pushed out from the other side, e.g. with a
screwdriver. Proceed as follows in this case:
▸
Remove the cell inlet filter (
see Chapter “Cell inlet filter maintenance”, page 21
▸
Remove the ejector block (