![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203014.webp)
14
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
3
MAINTENANCE
3.4
Working on the cell
Fig. 4: MCS200
1
Disconnect the MCS200HW power supply.
2
Let the MCS200HW cool down.
3
Loosen the fastening screws of the cell cover on the right and left with a Phillips screw-
driver (4 pieces).
DANGER: Risk of burns due to hot surface.
Allow the MCS200HW to cool down before carrying out any work.
NOTE: Do not switch off the instrument air supply.
Tools required
Phillips screwdriver
1 Cell
2 Sender/receiver unit with electronics unit
Do not remove the screws, only loosen them.