![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203072.webp)
72
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
9
Close the cell cover and screw tight.
10
Adjust the oxygen sensor.
1
Select
Parameterization
->
O2-sensor
.
2
Check nominal value: The nominal value must be 20.95%.
3
Select
Adjustment
->
Start adjustment
.
4
Click
Adjust O2
.
>>> Oxygen sensor is adjusted.
In the case of the maintenance message
S047 Deviation O2 Just. too large
due to
exceeding the limit value, the message can be reset under
Maintenance ->
Acknowledge active message
.