![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203066.webp)
66
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
5
Place the removed cell down with the underside facing upwards.
Fig. 83: Cell, underside
6
Loosen the fastening screws of the lower cover plate with a Phillips screwdriver
(4 pieces).
7
Remove the sealing rings from the tubes.
8
Remove the lower cell cover plate.
9
Remove the side covers of the cell on the left and right.
Perform the following steps on both sides (
see Fig. 84 “Cell. side cover”, page 66
▸
Loosen fastening clips (1) with a Phillips screwdriver (2 pieces).
▸
Fastening screws (2) of the cell cover (2 pieces) have already been loosened (do not
unscrew).
▸
Loosen fixing screws (3) of the side cover with a Phillips screwdriver (2 pieces).
▸
Loosen fastening screws (4) of the bracket plate with a 5 mm Allen key (2 pieces).
Fig. 84: Cell. side cover
1 Sealing ring
2 Tube
3 Fastening screw
1
Fastening clips, screws
2
Cell cover, fastening screws
3
Side cover, fastening screws
4
Bracket plate, fastening screws