![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203094.webp)
94
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
Fig. 135: Sender/receiver unit, fastening screws, inside, left
6
Close the sender/receiver unit cover.
7
Loosen the fastening screws of the sender/receiver unit to the device cabinet using a
Phillips screwdriver (3 pieces).
Fig. 136: Sender/receiver unit, fastening screws
8
Lift the sender/receiver unit with the outer panel out of the device cabinet (
“Transmit/receive unit, front side”, page 95
):
▸
Lay the sender/receiver unit on a level work surface.
▸
Turn the sender/receiver unit with the underside upwards.
9
Loosen the fastening screws of the two templates on the rear side with a 2.5 mm Allen
key (2 pieces).
1
Fastening screw
Pay attention to dust protection: Replace the electronics housing cover during work on
the sender/receiver unit.
1
Fastening screw
WARNING: Risk of injury through heavy load.
Lift and transport with suitable lifting equipment.