![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203019.webp)
19
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
MAINTENANCE
3
Fig. 12: Cell, A-holder, right
4
Make hose connections and electrical connections:
1
Connect the power supply of the cell heater.
▸
Connect the plug into the CELL slot below the sender/receiver unit.
Fig. 13: Power supply, cell heater
2
Insert the oxygen sensor into the device and screw tight.
▸
Fix the line of the oxygen sensor to the cell with the fastening clip.
3
Connect hose lines 1 to 3 to the marked slots (
, item
number 7).
▸
Fix hose lines 1 and 3 to the cell with fastening clips as necessary.
1 A-holder fastening screws, right
1 CELL slot