![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203090.webp)
90
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
Fig. 130: Beamer, connections
3
Loosen the fastening screws with a 5 mm Allen key.
4
Push the beamer to the left and pull it out.
5
Connect the new beamer.
6
Screw the beamer tight.
7
Connect the MCS200HW power supply.
8
Replace the drying agent (
see Chapter “Replacing the drying agent”, page 44
9
Close the sender/receiver unit unit and screw tight.
10
Switch the MCS200HW on.
11
Check the beamer current (
see Chapter “Beamer current check”, page 47
).
12
Reset the beamer service life (
see Chapter “Resetting the beamer service life”,
13
Reset the reference energy (
see Chapter “Resetting the reference energy”, page 91
5.3.2.1
Resetting the beamer service life
1
Select
Parameterization
->
Operating hours counter
.
2
Click
Reset
.
>>> Beamer service life is set to zero.
1 Beamer
2 Fastening screw
3 Power supply plug connection