![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203134.webp)
134
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
5
REPAIRS
Fig. 215: Disconnect the upper electronics unit cable.
5
Remove the LPMS01 with complete upper electronics unit.
6
Remove the CPU (
see Chapter “Replacing the LINUX CPU”, page 135
7
Optional steps when the LPMS01 is not replaced with the complete top drawer:
1
Loosen the fastening screws of the LPMS01 with a Phillips screwdriver (9 pieces).
Fig. 216: LPMS01, fastening screws
2
Loosen the right studs with a 5 mm socket wrench (8 pieces).
Fig. 217: Electronics unit, right side
3
Remove the red cover caps.
4
Remove the LPMS01 from the upper electronics unit.
5
Fit the new LPMS01 into the upper electronics unit.
6
Screw the LPMS01 tight in the upper electronics unit.
7
Carefully tighten the studs on the right.
8
Put on the red cover caps.
Keep the CPU for reassembly.
1
Fastening screws
1
Studs
2
Cover cap