![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203039.webp)
39
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
MAINTENANCE
3
9
Carry out tubes maintenance (
see Chapter “Tubes maintenance”, page 40
).
10
Fit a new O-ring on the mirror plate.
Fig. 46: O-ring, lower mirror plate
11
Fit the lower mirror plate.
Fig. 47: Positioning the lower mirror plate
12
Screw the lower mirror plate tight.
13
Screw the lower cell cover plate tight.
14
Fit the tubes O-rings.
15
Refit the cell (
see Chapter “Working on the sender/receiver unit”, page 43
Suitable aids for removing O-ring residues:
– Flat tool (slot screwdriver, scalpel or similar)
– Acetone
1 Lower mirror plate
2 O-ring
NOTE: Material damage
Protect mirror plates from insulation particles. Do not touch the insulation material.
Observe alignment: Align the labeled side of the mirror plate to the front of the cell inlet
filter.
1 Mirror plate labeling
2 Cell front side with cell inlet filter