![background image](http://html.mh-extra.com/html/sick/mcs200hw/mcs200hw_service-manual_1264203141.webp)
141
8024638/AE00/V1-0/2019-09| SICK
S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
REPAIRS
5
7
Loosen the fastening screws of the circuit board:
▸
Loosen the studs with a 7 mm socket wrench (
see Fig. 230 “LPMS02 overview 2”,
).
▸
Loosen the fastening screws with a Phillips screwdriver (4 pieces) (
8
Remove the green plugs from the right side of the electronics unit (6 pieces).
Fig. 231: Lower electronics unit, plugs, right
9
Remove the green plugs from the underside of the electronics unit (5 pieces).
Fig. 232: Lower electronics unit, plugs, bottom
10
Remove the LPMS02 carefully.
Fig. 233: LPMS02 removed
11
Fit the new LPMS02:
▸
Carefully insert the circuit board tilted slightly upwards into the recess.
1
Plugs
The plugs are coded and can only be reconnected to the correct socket.
The plugs are coded and can only be reconnected to the correct socket.