If you enter a PROFINET name that does not comply with the PROFINET naming
rules, Safety Designer can convert this name into a character string that is stored
in the device as a valid PROFINET name. The same character string must be used in
the PROFINET controller. Some other configuration software for PROFINET controllers
besides Safety Designer also convert the PROFINET name and can also calculate and
display the originally entered name from the character string.
Addressing
If communication between the device and a controller or a computer will be established
via TCP/IP, please enter the IP settings here.
b
Enter
IP adress
,
Subnet
and, if applicable,
Router
.
b
Activate the
Save the IP address in the device.
option.
✓
The IP address will be stored in the device so that it is retained even after switch‐
ing the system off and on again. It can be changed, however, from the PROFINET
controller.
Reading and transmitting values
If the values in the project and the values in the device differ, you can read the values
out from the device and adopt them in the project. Alternatively, you can transmit
values from the project to the device.
b
Click on
Read from device
.
✓
The values are read from the device and adopted in the project.
b
Click on
Transfer to device
.
✓
The values from the project are transmitted to the device.
7
CONFIGURATION
74
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 – PROFINET
8027931/2022-10-24 | SICK
Subject to change without notice