outdoorScan3 Pro – PROFINET
Supported protocol versions
•
PROFINET specification V2.3
•
PROFIsafe profile in accordance with specification V2.4
•
PROFIsafe profile in accordance with specification V2.6.1
Cycle time
1 ms, 2 ms, 4 ms, 8 ms, 16 ms …
Conformance
Conformance Class C
Network management
•
SNMP
•
MIB-2
•
LLDP in accordance with IEEE 802.1AB
•
MRP client support
Net load
Net load class III in acc. with security level 1 test
Switch properties
•
2 port real-time switch compliant with IEEE 802
•
Conformance Class C
Port properties
•
100BASE-TX (only devices with M12 or RJ45 connection)
•
Auto negotiation (only devices with M12 or RJ45 connec‐
tion)
•
Auto crossover (MDIX) (only devices with M12 or RJ45 con‐
nection)
•
Auto polarity (only devices with M12 or RJ45 connection)
•
100BASE-POF (only devices with SCRJ connection)
Diagnostics
•
I&M data sets 0 … 5
•
•
Attenuation diagnostics with POF (only devices with SCRJ
connection)
Additional services
1)
•
PROFIenergy
•
F_iPar_CRC
•
Acyclic read-/write services for communication via TCI
•
SNTP (client and server)
Length of cable
≤ 100 m
1)
The SNTP server provides the time since the device was switched on.
Electrical data
Table 33: Electrical data
outdoorScan3 Pro – PROFINET
Operating data
Protection class
III (IEC 61140)
Supply voltage V
S
24 V DC (16.8 V to 30 V DC) (SELV/PELV)
1)
Residual ripple
± 5%
2)
Start-up current at 24 V
≤ 3 A
Current consumption at 24 V
Operation ≤ 0.45 A (type 0.3 A)
Sleep mode Type 0.29 A
Power consumption
Operation ≤ 11 W (type 7.2 W)
Sleep mode Type 7 W
Power-up delay
≤ 45 s (type 20 s)
1)
The power supply unit must be able to jumper a brief power failure of 20 ms as specified in
IEC 60204-1. Suitable power supply units are available as accessories from SICK.
2)
The voltage level must not fall below the specified minimum voltage.
TECHNICAL DATA
13
8027931/2022-10-24 | SICK
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 – PROFINET
139
Subject to change without notice