Figure 61: Alignment about the transverse axis
Figure 62: Alignment about the depth axis
b
After alignment, tighten the screws with the specified tightening torque.
8.3
Switching on
After switching on, the device performs various internal tests. The OFF LED illuminates
continually. The ON LED is off.
When switched on for the first time, the startup process can take up to 100 seconds.
When switching on again, the required startup time depends on the volume of configu‐
ration data. The startup process then takes about 10 to 30 seconds.
COMMISSIONING
8
8027931/2022-10-24 | SICK
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 – PROFINET
111
Subject to change without notice