Number
Severity
Description
Troubleshooting
261
Need for mainte‐
nance
Tamper protection
The safety laser scanner does not detect
a contour in an area of at least 90° (max‐
imum measuring range 40 m). All safety
outputs in the OFF state.
262
Need for mainte‐
nance
Faulty configuration
b
Reconfigure the device.
263
Need for mainte‐
nance
PROFIsafe communication inactive
b
Perform reintegration.
b
Change watchdog time.
13.6.3
I&M data
Table 48: I&M data available
Parameter
Explanation
Write access
I&M data set 0
Vendor_ID
Ident number, awarded by PNO, in
the case of SICK 0x0101
–
OrderID
Part number of the device
–
IM_Serial_Number
Device serial number
–
IM_Hardware_Revision
Hardware version of the device
The revision level of the device is
output as a five-digit number without
separating dots.
To convert the revision level to the
normal notation:
1.
Insert a dot after the first and
third digits.
2.
Remove leading zeros.
Example:
•
Output value: 10203
•
Revision level: 1.2.3
–
IM_SWRevision_Func‐
tional_Enhancement
Firmware version of the device
–
IM_SWRevision_Bug_Fix
–
IM_SWRevision_Internal_Change
–
IM_REVISION_COUNTER
Version of the I&M record
–
IM_Profile_ID
–
IM_Profile_Specific_Type
–
IM_Version_Major
–
IM_Version_Minor
–
IM_Supported
Information about further supported
I&M data records
–
I&M data set 1
IM_Tag_Function
System ID
Yes
IM_Tag_Location
Location identifier
Yes
I&M data set 2
IM_Date
Installation date
Yes
I&M data set 3
IM_Descriptor
Comment
Yes
I&M data set 4
TECHNICAL DATA
13
8027931/2022-10-24 | SICK
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 – PROFINET
153
Subject to change without notice