manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 828 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 828

8-9

TROUBLESHOOTING

Contents

PAPER MISFEED ILLUSTRATIONS

If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations 
below. Refer to the illustration below and then go to the appropriate illustration (1 to 14) for your situation.

☞

(1): page 8-9, (2)-(3): page 8-10, (4)-(6): page 8-11, (7)-(10): page 8-12, (11)-(12): page 8-13, (13)-(14): page 8-14

(1)

Paper misfeed in the finisher/saddle stitch 
finisher

Remove any misfed paper 
from the paper exit area.
Be careful not to tear the 
misfed paper during 
removal.

Close the upper cover of the 
finisher/saddle stitch 
finisher.

When using the finisher (3 trays)

Open the front covers on 
the right and left of the 
finisher.

Lift the paper guide in the 
direction of the arrow.
Push the paper guide until it 
clicks into place.

Lower the paper guide in 
the direction of the arrow.

Remove any misfed paper.
Be careful not to tear the 
misfed paper during 
removal.

If there was no misfed paper 
in the previous step, remove 
any misfed paper.
Be careful not to tear the 
misfed paper during 
removal.

If there was no misfed paper 
two steps ago, lower the 
paper guide in the direction 
of the arrow until it clicks 
into place.

(12)

(1)

(1)

(13)

(4)

(14)

(1)(2)

(11)

(5)(6)

(9)(10)

(3)

(7)(8)

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments