manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 147 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 147

1-106

BEFORE USING THE MACHINE

Contents

4

Select [SC2 TCP/IP Port] and then click 
the [New Port] button.

• The "SC2 TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom 

installation" with "LPR Direct Print (Specify Address/Auto Search)" selected.

• If the printer driver is installed using a "Custom installation" with "IPP" selected, the [SC-Print2005 Port] is added. If 

you need to change the printer port when the machine is connected to an intranet or a wide area network (WAN) 
using the IPP function, select [SC-Print2005 Port], click the [New Port] button, and follow the on-screen instructions 
to create the port again.

5

Create the new port.

(1) Enter the machine's IP address.

☞

Start Guide "Checking the IP address of the machine"

(2) Make sure that [LPR] is selected.

(3) Make sure that [lp] is entered.

(4) Click the [OK] button.

6

Click the [Close] button in the screen of step 4.

7

Make sure the created printer port is selected in the printer properties window 
and then click the [Apply] button.

(4)

(1) (2)

(3)

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments