Home
/
Sharp
/
MX-M623
/
Operation Manual

Sharp MX-M623, Operation Manual, Page: 192 / 877

Share

Page: 192 / 877

Sharp MX-M623 Operation Manual Download Page 192

2-32

OUTPUT

To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions
that can be selected are sort, group, offset, staple sort, saddle stitch, and punch. All explanations of the settings below
assume that a saddle stitch finisher is installed.

(1)

[Offset Tray] key

Output is delivered to the offset tray. The [Offset Tray]
key is automatically selected when the [Staple Sort] key
is selected.

(2)

[Offset] key

This is used to offset each set of output from the previous
set.
The offset function operates when the checkbox is
selected

and does not operate when the checkbox is

not selected

. (The offset checkmark is automatically

cleared when the staple sort function is selected.)

☞

Offset function

(page 2-34)

(3)

[Sort] key

This is used to sort (collate) output into sets.

☞

(4)

[Staple Sort] key

This is used to sort output into sets, staple each set, and
deliver the sets to the tray. (Note that the sets will not be
offset in the output tray.) When this function is selected,
three keys will appear for selecting the staple position.

☞

Staple sort function / Saddle stitch function

(page

(5)

[Group] key

This is used to group copies by page.

☞

(6)

Output display

An icon will appear to indicate the output mode.

(7)

[OK] key

Touch this key to close the output screen and return to
the base screen.

(8)

[Saddle Stitch] key

This is used to staple and fold each set of copies at the
centerline.

☞

Staple sort function / Saddle stitch function

(page

When this key is touched, the saddle stitch setting screen
appears. (Only when "Automatic Saddle Stitch" is
enabled in the system settings (administrator).)

(9)

[Center Tray] key

Output is delivered to the center tray.

(10) [Punch] key

This is used to punch holes in the output.

☞

(11) [Fold] key

This folds printed output in half. You can choose whether
the output is folded inward or outward.

☞

Paper folding function

OK

Output

Sort

Offset

Offset

Tray

Staple
Sort

Group

Saddle
Stitch

Punch

Fold

Center
Tray

(6)

(7)

(3)

(4)

(5)

(1)

(2)

(11)

(8)

(10)

(9)

«
...
190
191
192
193
194
...
»

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments