Sharp MX-M623 Operation Manual Download Page 125

Page: 125 / 877

1-84

BEFORE USING THE MACHINE

Contents

Printers connected to the network are
detected. Select the machine and click
the [Next] button.

• If the machine is not found, make sure that the machine is powered on and that the machine is connected to the

network, and then click the [Re-search] button.

• You can also click the [Specify condition] button and search for the machine by entering the machine's name (host

name) or IP address.

☞

Start Guide "Checking the IP address of the machine"

A confirmation window appears. Check the contents and then click the [Next]
button.

When the printer driver selection
window appears, select the printer driver
to be installed and click the [Next]
button.

Click the checkbox of the printer driver to be installed so that a
checkmark (

) appears.

• When the PC-Fax driver is being installed, this screen does not appear. Go to the next step.

• The PS3 expansion kit is required to use the PS printer driver or the PPD driver.

• The [PPD] checkbox only appears if you are using Windows 2000/XP/Server 2003/Vista/Server 2008/7.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M623, Operation Manual, Page: 125 / 877

Search results

Summary of Contents for MX-M623

Reviews: