manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 695 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 695

6-45

DOCUMENT FILING

Contents

IMAGE CHECK SCREEN

This section explains the image check screen.

(1)

Information display

This shows information on the displayed image.

(2)

Preview image

This shows an image of the selected file.
If the image is cut off, use the scroll bars at the right and 
bottom of the screen to scroll the image. Touch a bar and 
slide it to scroll. (You can also touch the 

 keys to 

scroll.)

(3)

Change page keys

When there are multiple pages, use these keys to 
change pages.

•

 keys:  Go to the first or the last page.

•

 keys:  Go to the previous page or the next 

page.

• Page number display: This shows the total number of 

pages and the current page 
number. You can touch the 
current page number key and 
enter a number with the 
numeric keys to go to that page 
number.

(4)

"Display Rotation" key

This rotates the image right or left by 90 degrees. The 
rotation applies to all pages in the file, not just the 
displayed page.

(5)

[Detail] key

This shows the detailed information screen.

☞

FILE SELECTION SCREEN

 (page 6-27)

(6)

Display zoom key

Use this to set the zoom ratio of the displayed image. 
Changes from the left in the order "Full Page", "Twice", 
"4 Times", "8 Times". The setting applies to all pages in 
the file, not just the displayed page.

0001

0010

file-01

Name 1

B/W

8½x11

Image Check

Detail

Back

Display Rotation

(3)

(5)

(1)

(2)

(4)

(6)

• For a print file, only an image of the first page of the 

file is shown; the displayed page cannot be 
changed.

• When the scan data of a long original is displayed, 

the edge of the image may be cut off.

A print file cannot be rotated.

A preview image is an image for display on the touch panel. It will differ from the actual print result.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments