manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 129 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 129

1-88

BEFORE USING THE MACHINE

Contents

This completes the installation.

• After installation, see "

CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE 

MACHINE

" (page 1-98) to configure the printer driver settings.

• If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER 

UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "

INSTALLING THE PS DISPLAY FONTS

" (page 

1-104).

• If the machine is being used on an IPv6 network, enter any numbers or characters.

Printing using the IPP function and the SSL function

The IPP function can be used to print to the machine over a network using HTTP protocol.
When the machine is in a remote location, this function can be used in place of the fax function to print a higher quality 
image than a fax. The IPP function can also be used in combination with the SSL (encrypted communication) function to 
encrypt the print data. This enables secure printing with no concern that the data will be leaked to others.

When the software selection screen appears in step 6 of "

OPENING THE SOFTWARE SELECTION SCREEN (FOR 

ALL SOFTWARE)

" (page 1-81), perform the steps below.

10

Follow the on-screen instructions.

Read the message in the window that appears and click the [Next] button.
Installation begins.

•

If you are using Windows Vista/Server 2008/7

If a security warning window appears, be sure to click [Install this driver software anyway].

•

If you are using Windows 2000/XP/Server 2003

If a warning message regarding the Windows logo test or digital signature appears, be sure to click the [Continue 
Anyway] or [Yes] button.

11

When the installation completed screen appears, click the [OK] button.

12

Click the [Close] button in the window of step 1.

After the installation, a message prompting you to restart your computer may appear. If this message appears, click 
the [Yes] button to restart your computer.

To use the SSL function, configure the "SSL Settings" in the system settings (administrator) of the machine. To configure the 
settings, see "7. SYSTEM SETTINGS".

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments