manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 131 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 131

1-90

BEFORE USING THE MACHINE

Contents

This completes the installation.

• After installation, see "

CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE 

MACHINE

" (page 1-98) to configure the printer driver settings.

• If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER 

UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "

INSTALLING THE PS DISPLAY FONTS

" (page 

1-104).

4

If a proxy server is used, specify the 
proxy server and click the [Next] button.

To specify a proxy server, select [Print via the proxy server] and 
then enter the [Address] and [Port number].

5

Enter the machine's URL and click the 
[Next] button.

Enter the URL in the following format:

Normal format:

http://<the machine's domain name or IP address>:631*

1

/ipp

*1 Normally "631" should be entered for the port number. If the 

IPP port number has been changed on the machine, enter 
the new port number.

When SSL is used:

https://< the machine's domain name or IP address>:<port number*

2

>/ipp

*2 Normally the port number and the colon ":" immediately 

preceding the port number can be omitted. If the IPP port 
number for SSL has been changed on the machine, enter 
the new port number.

If your computer and the machine are connected to the same local area network, you can click the [Search] button to 
search for the machine. The machine's URL will appear. Select the URL and click the [OK] button. You will return to 
the above screen and the machine's URL will be automatically entered.

6

Perform steps 5 through 12 on page 1-87 to continue the installation.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments