manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 222 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 222

2-62

COPIER

Contents

4

Select cover settings.

(1) If the cover sheet will be copied on, touch 

the [Yes] key. Otherwise, touch the [No] 
key.

If the [No] key is touched, only cover insertion will be 
performed.
In this case, go to step (3).

(2) To copy on one side of the cover, touch the 

[1-Sided] key. To copy on both sides of the 
cover, touch the [2-Sided] key.

(3) Select paper settings for the cover.

(A) The currently selected paper tray for the cover is 

displayed.

(B) The size and type of paper in the currently selected 

tray is displayed.

To change the paper tray for the cover, touch the "Paper 
Tray" key.
When the "Paper Tray" key is touched, a tray selection 
screen appears. Select the paper tray for the cover in the 
tray selection screen and touch the [OK] key.

(4) Touch the [OK] key.

• If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab 

paper can be inserted.

• When the cover paper is fed from the inserter, the cover cannot be copied on.

To cancel cover settings...

Touch the [Cancel] key.

5

If you wish to insert a back cover, touch 
the [Back Cover] key.

The screen of step 4 appears. The procedures are the same as 
for the front cover. Follow the procedures in step 4.
When following the procedures, substitute "Back Cover" for 
"Front Cover".

Covers/Inserts

Cancel

Front Cover Setting

OK

Paper Tray

Print on Front Cover

Yes

8½x11

Plain

No

2-Sided

1-Sided

Bypass

Tray

(3)

(4)

(1)

(2)

(A)

(B)

Special Modes

OK

Cancel

OK

Front
Cover

Back

Cover

Insertion

Type B

Insertion

Type A

Insertion

Settings

Tray Settings

Inserts Setting

Cover Setting

Covers/Inserts

Page Layout

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments